Skip to content
Snippets Groups Projects
Select Git revision
  • riscv-sqoscfg-rfc-v2
  • riscv-cbqri-rfc-v2
  • riscv-cbqri-rfc
  • master default protected
  • v6.3-rc6
  • v6.3-rc5
  • v6.3-rc4
  • v6.3-rc3
  • v6.3-rc2
  • v6.3-rc1
  • v6.2
  • v6.2-rc8
  • v6.2-rc7
  • v6.2-rc6
  • v6.2-rc5
  • v6.2-rc4
  • v6.2-rc3
  • v6.2-rc2
  • v6.2-rc1
  • v6.1
  • v6.1-rc8
  • v6.1-rc7
  • v6.1-rc6
  • v6.1-rc5
24 results
Search by author
  • Any Author
0 authors
  1. Sep 05, 2022
  3. Aug 15, 2022
  5. Feb 15, 2022
    • Masahiro Yamada's avatar
      kbuild: replace $(if A,A,B) with $(or A,B) · 5c816641
      Masahiro Yamada authored 
      
$(or ...) is available since GNU Make 3.81, and useful to shorten the
code in some places.

Covert as follows:

  $(if A,A,B)  -->  $(or A,B)

This patch also converts:

  $(if A, A, B) --> $(or A, B)

Strictly speaking, the latter is not an equivalent conversion because
GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B)
expands to " A", while $(or A, B) expands to "A".

Anyway, preceding spaces are not significant in the code hunks I touched.

Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
Reviewed-by: default avatarNicolas Schier <nicolas@fjasle.eu>
      5c816641
  7. Jul 06, 2020
  9. Jan 27, 2020
    • Dexuan Cui's avatar
      Tools: hv: Reopen the devices if read() or write() returns errors · 9fc3c01a
      Dexuan Cui authored 
      
The state machine in the hv_utils driver can run out of order in some
corner cases, e.g. if the kvp daemon doesn't call write() fast enough
due to some reason, kvp_timeout_func() can run first and move the state
to HVUTIL_READY; next, when kvp_on_msg() is called it returns -EINVAL
since kvp_transaction.state is smaller than HVUTIL_USERSPACE_REQ; later,
the daemon's write() gets an error -EINVAL, and the daemon will exit().

We can reproduce the issue by sending a SIGSTOP signal to the daemon, wait
for 1 minute, and send a SIGCONT signal to the daemon: the daemon will
exit() quickly.

We can fix the issue by forcing a reset of the device (which means the
daemon can close() and open() the device again) and doing extra necessary
clean-up.

Signed-off-by: default avatarDexuan Cui <decui@microsoft.com>
Reviewed-by: default avatarMichael Kelley <mikelley@microsoft.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      9fc3c01a
  11. Nov 22, 2019
  13. Aug 20, 2019
  15. Aug 17, 2019
  17. Jun 05, 2019
  19. Nov 11, 2018
  21. Sep 30, 2018
  23. Sep 12, 2018
  25. Jul 03, 2018
  27. Mar 06, 2018
  29. Feb 22, 2018
    • Martin Kelly's avatar
      tools: fix cross-compile var clobbering · 7ed1c190
      Martin Kelly authored 
      Currently a number of Makefiles break when used with toolchains that
pass extra flags in CC and other cross-compile related variables (such
as --sysroot).

Thus we get this error when we use a toolchain that puts --sysroot in
the CC var:

  ~/src/linux/tools$ make iio
  [snip]
  iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory
    #include <unistd.h>
             ^~~~~~~~~~

This occurs because we clobber several env vars related to
cross-compiling with lines like this:

  CC = $(CROSS_COMPILE)gcc

Although this will point to a valid cross-compiler, we lose any extra
flags that might exist in the CC variable, which can break toolchains
that rely on them (for example, those that use --sysroot).

This easily shows up using a Yocto SDK:

  $ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi

  $ echo $CC
  arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard
  -mcpu=cortex-a8
  --sysroot=[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi

  $ echo $CROSS_COMPILE
  arm-poky-linux-gnueabi-

  $ echo ${CROSS_COMPILE}gcc
  krm-poky-linux-gnueabi-gcc

Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the
--sysroot and other flags that enable us to find the right libraries to
link against, so we can't find unistd.h and other libraries and headers.
Normally with the --sysroot flag we would find unistd.h in the sdk
directory in the sysroot:

  $ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h'
  [snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h

The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not
already set, and it compiles correctly with the above toolchain.

So, generalize the logic that perf uses in the common Makefile and
remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile.

Note that this patch does not fix cross-compile for all the tools (some
have other bugs), but it does fix it for all except usb and acpi, which
still have other unrelated issues.

I tested both with and without the patch on native and cross-build and
there appear to be no regressions.

Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.com


Signed-off-by: default avatarMartin Kelly <martin@martingkelly.com>
Acked-by: default avatarMark Brown <broonie@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Pali Rohar <pali.rohar@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Lv Zheng <lv.zheng@intel.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7ed1c190
  31. Nov 28, 2017
  33. Nov 02, 2017
    • Greg Kroah-Hartman's avatar
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      Greg Kroah-Hartman authored 
      
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: default avatarKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: default avatarPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  35. Aug 16, 2017
  37. Aug 03, 2017
  39. Jul 17, 2017
  41. Jun 02, 2017
  43. May 18, 2017
  45. May 16, 2017
  47. Mar 07, 2017
  49. Dec 06, 2016
  51. Nov 07, 2016