Currently we just stash anything we got into file->f_flags, and the
report it in fcntl(F_GETFD).  This patch just clears out all unknown
flags so that we don't pass them to the fs or report them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Before calling write f_ops, call file_start_write() instead
of sb_start_write().

Replace {sb,file}_start_write() for {copy,clone}_file_range() and
for fallocate().

Beyond correct semantics, this avoids freeze protection to sb when
operating on special inodes, such as fallocate() on a blockdev.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

There was an obscure use case of fallocate of directory inode
in the vfs helper with the comment:
"Let individual file system decide if it supports preallocation
 for directories or not."

But there is no in-tree file system that implements fallocate
for directory operations.

Deny an attempt to fallocate a directory with EISDIR error.

This change is needed prior to converting sb_start_write()
to  file_start_write(), so freeze protection is correctly
handled for cases of fallocate file and blockdev.

Cc: linux-api@vger.kernel.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After much discussion, it seems that the fallocate feature flag
FALLOC_FL_ZERO_RANGE maps nicely to SCSI WRITE SAME; and the feature
FALLOC_FL_PUNCH_HOLE maps nicely to the devices that have been whitelisted
for zeroing SCSI UNMAP.  Punch still requires that FALLOC_FL_KEEP_SIZE is
set.  A length that goes past the end of the device will be clamped to the
device size if KEEP_SIZE is set; or will return -EINVAL if not.  Both
start and length must be aligned to the device's logical block size.

Since the semantics of fallocate are fairly well established already, wire
up the two pieces.  The other fallocate variants (collapse range, insert
range, and allocate blocks) are not supported.

Link: http://lkml.kernel.org/r/147518379992.22791.8849838163218235007.stgit@birch.djwong.org


Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Mike Snitzer <snitzer@redhat.com> # tweaked header
Cc: Brian Foster <bfoster@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a new fallocate mode flag that explicitly unshares blocks on
filesystems that support such features.  The new flag can only
be used with an allocate-mode fallocate call.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

The problem with writecount is: we want consistent handling of it for
underlying filesystems as well as overlayfs.  Making sure i_writecount is
correct on all layers is difficult.  Instead this patch makes sure that
when write access is acquired, it's always done on the underlying writable
layer (called the upper layer).  We must also make sure to look at the
writecount on this layer when checking for conflicting leases.

Open for write already updates the upper layer's writecount.  Leaving only
truncate.

For truncate copy up must happen before get_write_access() so that the
writecount is updated on the upper layer.  Problem with this is if
something fails after that, then copy-up was done needlessly.  E.g. if
break_lease() was interrupted.  Probably not a big deal in practice.

Another interesting case is if there's a denywrite on a lower file that is
then opened for write or truncated.  With this patch these will succeed,
which is somewhat counterintuitive.  But I think it's still acceptable,
considering that the copy-up does actually create a different file, so the
old, denywrite mapping won't be touched.

On non-overlayfs d_real() is an identity function and d_real_inode() is
equivalent to d_inode() so this patch doesn't change behavior in that case.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Cc: "J. Bruce Fields" <bfields@fieldses.org>

This patch allows flock, posix locks, ofd locks and leases to work
correctly on overlayfs.

Instead of using the underlying inode for storing lock context use the
overlay inode.  This allows locks to be persistent across copy-up.

This is done by introducing locks_inode() helper and using it instead of
file_inode() to get the inode in locking code.  For non-overlayfs the two
are equivalent, except for an extra pointer dereference in locks_inode().

Since lock operations are in "struct file_operations" we must also make
sure not to call underlying filesystem's lock operations.  Introcude a
super block flag MS_NOREMOTELOCK to this effect.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Cc: "J. Bruce Fields" <bfields@fieldses.org>

The two methods essentially do the same: find the real dentry/inode
belonging to an overlay dentry.  The difference is in the usage:

vfs_open() uses ->d_select_inode() and expects the function to perform
copy-up if necessary based on the open flags argument.

file_dentry() uses ->d_real() passing in the overlay dentry as well as the
underlying inode.

vfs_rename() uses ->d_select_inode() but passes zero flags.  ->d_real()
with a zero inode would have worked just as well here.

This patch merges the functionality of ->d_select_inode() into ->d_real()
by adding an 'open_flags' argument to the latter.

[Al Viro] Make the signature of d_real() match that of ->d_real() again.
And constify the inode argument, while we are at it.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v4.2+

same as read() on regular files has, and for the same reason.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

I need an API that allows me to obtain a clone of the current file
pointer to pass in to an exec handler.  I've labelled this as an
internal API because I can't see how it would be useful outside of the
fs subsystem.  The use case will be a persistent binfmt_misc handler.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Jan Kara <jack@suse.cz>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

This commit fixes the following security hole affecting systems where
all of the following conditions are fulfilled:

 - The fs.suid_dumpable sysctl is set to 2.
 - The kernel.core_pattern sysctl's value starts with "/". (Systems
   where kernel.core_pattern starts with "|/" are not affected.)
 - Unprivileged user namespace creation is permitted. (This is
   true on Linux >=3.8, but some distributions disallow it by
   default using a distro patch.)

Under these conditions, if a program executes under secure exec rules,
causing it to run with the SUID_DUMP_ROOT flag, then unshares its user
namespace, changes its root directory and crashes, the coredump will be
written using fsuid=0 and a path derived from kernel.core_pattern - but
this path is interpreted relative to the root directory of the process,
allowing the attacker to control where a coredump will be written with
root privileges.

To fix the security issue, always interpret core_pattern for dumps that
are written under SUID_DUMP_ROOT relative to the root directory of init.

Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Today proc and sysfs do not contain any executable files.  Several
applications today mount proc or sysfs without noexec and nosuid and
then depend on there being no exectuables files on proc or sysfs.
Having any executable files show on proc or sysfs would cause
a user space visible regression, and most likely security problems.

Therefore commit to never allowing executables on proc and sysfs by
adding a new flag to mark them as filesystems without executables and
enforce that flag.

Test the flag where MNT_NOEXEC is tested today, so that the only user
visible effect will be that exectuables will be treated as if the
execute bit is cleared.

The filesystems proc and sysfs do not currently incoporate any
executable files so this does not result in any user visible effects.

This makes it unnecessary to vet changes to proc and sysfs tightly for
adding exectuable files or changes to chattr that would modify
existing files, as no matter what the individual file say they will
not be treated as exectuable files by the vfs.

Not having to vet changes to closely is important as without this we
are only one proc_create call (or another goof up in the
implementation of notify_change) from having problematic executables
on proc.  Those mistakes are all too easy to make and would create
a situation where there are security issues or the assumptions of
some program having to be broken (and cause userspace regressions).

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Comment in include/linux/security.h says that ->inode_killpriv() should
be called when setuid bit is being removed and that similar security
labels (in fact this applies only to file capabilities) should be
removed at this time as well. However we don't call ->inode_killpriv()
when we remove suid bit on truncate.

We fix the problem by calling ->inode_need_killpriv() and subsequently
->inode_killpriv() on truncate the same way as we do it on file write.

After this patch there's only one user of should_remove_suid() - ocfs2 -
and indeed it's buggy because it doesn't call ->inode_killpriv() on
write. However fixing it is difficult because of special locking
constraints.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Turn
	d_path(&file->f_path, ...);
into
	file_path(file, ...);

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Make file->f_path always point to the overlay dentry so that the path in
/proc/pid/fd is correct and to ensure that label-based LSMs have access to the
overlay as well as the underlay (path-based LSMs probably don't need it).

Using my union testsuite to set things up, before the patch I see:

	[root@andromeda union-testsuite]# bash 5</mnt/a/foo107
	[root@andromeda union-testsuite]# ls -l /proc/$$/fd/
	...
	lr-x------. 1 root root 64 Jun  5 14:38 5 -> /a/foo107
	[root@andromeda union-testsuite]# stat /mnt/a/foo107
	...
	Device: 23h/35d Inode: 13381       Links: 1
	...
	[root@andromeda union-testsuite]# stat -L /proc/$$/fd/5
	...
	Device: 23h/35d Inode: 13381       Links: 1
	...

After the patch:

	[root@andromeda union-testsuite]# bash 5</mnt/a/foo107
	[root@andromeda union-testsuite]# ls -l /proc/$$/fd/
	...
	lr-x------. 1 root root 64 Jun  5 14:22 5 -> /mnt/a/foo107
	[root@andromeda union-testsuite]# stat /mnt/a/foo107
	...
	Device: 23h/35d Inode: 40346       Links: 1
	...
	[root@andromeda union-testsuite]# stat -L /proc/$$/fd/5
	...
	Device: 23h/35d Inode: 40346       Links: 1
	...

Note the change in where /proc/$$/fd/5 points to in the ls command.  It was
pointing to /a/foo107 (which doesn't exist) and now points to /mnt/a/foo107
(which is correct).

The inode accessed, however, is the lower layer.  The union layer is on device
25h/37d and the upper layer on 24h/36d.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Make use of d_backing_inode() in pathwalk to gain access to an
inode or dentry that's on a lower layer.

Signed-off-by: David Howells <dhowells@redhat.com>

no remaining users

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

We have observed a BUG() crash in fs/attr.c:notify_change(). The crash
occurs during an rsync into a filesystem that is exported via NFS.

1.) fs/attr.c:notify_change() modifies the caller's version of attr.
2.) 6de0ec00 ("VFS: make notify_change pass ATTR_KILL_S*ID to
    setattr operations") introduced a BUG() restriction such that "no
    function will ever call notify_change() with both ATTR_MODE and
    ATTR_KILL_S*ID set". Under some circumstances though, it will have
    assisted in setting the caller's version of attr to this very
    combination.
3.) 27ac0ffe ("locks: break delegations on any attribute
    modification") introduced code to handle breaking
    delegations. This can result in notify_change() being re-called. attr
    _must_ be explicitly reset to avoid triggering the BUG() established
    in #2.
4.) The path that that triggers this is via fs/open.c:chmod_common().
    The combination of attr flags set here and in the first call to
    notify_change() along with a later failed break_deleg_wait()
    results in notify_change() being called again via retry_deleg
    without resetting attr.

Solution is to move retry_deleg in chmod_common() a bit further up to
ensure attr is completely reset.

There are other places where this seemingly could occur, such as
fs/utimes.c:utimes_common(), but the attr flags are not initially
set in such a way to trigger this.

Fixes: 27ac0ffe ("locks: break delegations on any attribute modification")
Reported-by: Eric Meddaugh <etmsys@rit.edu>
Tested-by: Eric Meddaugh <etmsys@rit.edu>
Signed-off-by: Andrew Elble <aweits@rit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

For one thing, LOOKUP_DIRECTORY will be dealt with in do_last().
For another, name can be an empty string, but not NULL - no callers
pass that and it would oops immediately if they would.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

FALLOC_FL_INSERT_RANGE command is the opposite command of
FALLOC_FL_COLLAPSE_RANGE that is needed for someone who wants to add
some data in the middle of file.

FALLOC_FL_INSERT_RANGE will create space for writing new data within
a file after shifting extents to right as given length. This command
also has same limitations as FALLOC_FL_COLLAPSE_RANGE in that
operations need to be filesystem block boundary aligned and cannot
cross the current EOF.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

All callers of get_xip_mem() are now gone.  Remove checks for it,
initialisers of it, documentation of it and the only implementation of it.
 Also remove mm/filemap_xip.c as it is now empty.  Also remove
documentation of the long-gone get_xip_page().

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are several areas in the kernel that create temporary filename
objects using the following pattern:

	int func(const char *name)
	{
		struct filename *file = { .name = name };
		...
		return 0;
	}

... which for the most part works okay, but it causes havoc within the
audit subsystem as the filename object does not persist beyond the
lifetime of the function.  This patch converts all of these temporary
filename objects into proper filename objects using getname_kernel()
and putname() which ensure that the filename object persists until the
audit subsystem is finished with it.

Also, a special thanks to Al Viro, Guenter Roeck, and Sabrina Dubroca
for helping resolve a difficult kernel panic on boot related to a
use-after-free problem in kern_path_create(); the thread can be seen
at the link below:

 * https://lkml.org/lkml/2015/1/20/710



This patch includes code that was either based on, or directly written
by Al in the above thread.

CC: viro@zeniv.linux.org.uk
CC: linux@roeck-us.net
CC: sd@queasysnail.net
CC: linux-fsdevel@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The fanotify and the inotify API can be used to monitor changes of the
file system.  System call fallocate() modifies files.  Hence it should
trigger the corresponding fanotify (FAN_MODIFY) and inotify (IN_MODIFY)
events.  The most interesting case is FALLOC_FL_COLLAPSE_RANGE because
this value allows to create arbitrary file content from random data.

This patch adds the missing call to fsnotify_modify().

The FAN_MODIFY and IN_MODIFY event will be created when fallocate()
succeeds.  It will even be created if the file length remains unchanged,
e.g.  when calling fanotify with flag FALLOC_FL_KEEP_SIZE.

This logic was primarily chosen to keep the coding simple.

It resembles the logic of the write() system call.

When we call write() we always create a FAN_MODIFY event, even in the case
of overwriting with identical data.

Events FAN_MODIFY and IN_MODIFY do not provide any guarantee that data was
actually changed.

Furthermore even if if the filesize remains unchanged, fallocate() may
influence whether a subsequent write() will succeed and hence the
fallocate() call may be considered a modification.

The fallocate(2) man page teaches: After a successful call, subsequent
writes into the range specified by offset and len are guaranteed not to
fail because of lack of disk space.

So calling fallocate(fd, FALLOC_FL_KEEP_SIZE, offset, len) may result in
different outcomes of a subsequent write depending on the values of offset
and len.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@parisplace.org>
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

... for situations when we don't have any candidate in pathnames - basically,
in descriptor-based syscalls.

[Folded the build fix for !CONFIG_AUDITSYSCALL configs from Chen Gang]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

This function needs to be exported so it can be used by the NFSD module
when responding to the new ALLOCATE and DEALLOCATE operations in NFS
v4.2.  Christoph Hellwig suggested renaming the function to stay
consistent with how other vfs functions are named.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Add a new inode operation i_op->dentry_open().  This is for stacked filesystems
that want to return a struct file from a different filesystem.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>

Fix the broken check for calling sys_fallocate() on an active swapfile,
introduced by commit 0790b31b ("fs: disallow all fallocate
operation on active swapfile").

Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Beginning to introduce those.  Just the callers for now, and it's
clumsier than it'll eventually become; once we finish converting
aio_read and aio_write instances, the things will get nicer.

For now, these guys are in parallel to ->aio_read() and ->aio_write();
they take iocb and iov_iter, with everything in iov_iter already
validated.  File offset is passed in iocb->ki_pos, iov/nr_segs -
in iov_iter.

Main concerns in that series are stack footprint and ability to
split the damn thing cleanly.

[fix from Peter Ujfalusi <peter.ujfalusi@ti.com> folded]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Since we are about to introduce new methods (read_iter/write_iter), the
tests in a bunch of places would have to grow inconveniently.  Check
once (at open() time) and store results in ->f_mode as FMODE_CAN_READ
and FMODE_CAN_WRITE resp.  It might end up being a temporary measure -
once everything switches from ->aio_{read,write} to ->{read,write}_iter
it might make sense to return to open-coded checks.  We'll see...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Currently some file system have IS_SWAPFILE check in their fallocate
implementations and some do not. However we should really prevent any
fallocate operation on swapfile so move the check to vfs and remove the
redundant checks from the file systems fallocate implementations.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Currently in do_fallocate in collapse range case we're checking
whether offset + len is not bigger than i_size.  However there is
nothing which would prevent i_size from changing so the check is
pointless.  It should be done in the file system itself and the file
system needs to make sure that i_size is not going to change.  The
i_size check for the other fallocate modes are also done in the
filesystems.

As it is now we can easily crash the kernel by having two processes
doing truncate and fallocate collapse range at the same time.  This
can be reproduced on ext4 and it is theoretically possible on xfs even
though I was not able to trigger it with this simple test.

This commit removes the check from do_fallocate and adds it to the
file system.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Currently punch hole and collapse range fallocate operation are not
allowed on append only file. This should be case for zero range as well.
Fix it by allowing only pure fallocate (possibly with keep size set).

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>