Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig

This converts the following to Kconfig:
   CONFIG_SUPPORT_EMMC_RPMB

This fixes a few platforms where the option was not taking effect as
intended.

Signed-off-by: Tom Rini <trini@konsulko.com>

configs/evb-px30_defconfig

@@ -68,6 +68,7 @@ CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
 CONFIG_MISC=y
 CONFIG_ROCKCHIP_OTP=y
+CONFIG_SUPPORT_EMMC_RPMB=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_PHY_REALTEK=y

configs/evb-rk3308_defconfig

@@ -49,6 +49,7 @@ CONFIG_CLK=y
 # CONFIG_USB_FUNCTION_FASTBOOT is not set
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_SUPPORT_EMMC_RPMB=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_DM_ETH=y

configs/evb-rk3568_defconfig

@@ -20,6 +20,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
 CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y

configs/firefly-px30_defconfig

@@ -69,6 +69,7 @@ CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
 CONFIG_MISC=y
 CONFIG_ROCKCHIP_OTP=y
+CONFIG_SUPPORT_EMMC_RPMB=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_PHY_REALTEK=y

configs/octeontx2_95xx_defconfig

@@ -72,6 +72,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_TFTP_TSIZE=y
 CONFIG_DM_I2C=y
 CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_HS400_SUPPORT=y
 CONFIG_MMC_OCTEONTX=y

configs/octeontx2_96xx_defconfig

@@ -78,6 +78,7 @@ CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_HS400_SUPPORT=y
 CONFIG_MMC_OCTEONTX=y

configs/octeontx_81xx_defconfig

@@ -75,6 +75,7 @@ CONFIG_SCSI_AHCI=y
 CONFIG_AHCI_PCI=y
 CONFIG_DM_I2C=y
 CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_OCTEONTX=y
 CONFIG_MTD=y

configs/octeontx_83xx_defconfig

@@ -72,6 +72,7 @@ CONFIG_SCSI_AHCI=y
 CONFIG_AHCI_PCI=y
 CONFIG_DM_I2C=y
 CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_OCTEONTX=y
 CONFIG_MTD=y

configs/roc-cc-rk3308_defconfig

@@ -49,6 +49,7 @@ CONFIG_CLK=y
 # CONFIG_USB_FUNCTION_FASTBOOT is not set
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_SUPPORT_EMMC_RPMB=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_DM_ETH=y

include/configs/evb_px30.h

@@ -12,6 +12,4 @@
 		"stdout=serial,vidconsole\0" \
 		"stderr=serial,vidconsole\0"
 
-#define CONFIG_SUPPORT_EMMC_RPMB
-
 #endif

include/configs/evb_rk3308.h

@@ -8,8 +8,6 @@
 
 #include <configs/rk3308_common.h>
 
-#define CONFIG_SUPPORT_EMMC_RPMB
-
 #define ROCKCHIP_DEVICE_SETTINGS \
 			"stdout=serial,vidconsole\0" \
 			"stderr=serial,vidconsole\0"

include/configs/evb_rk3568.h

@@ -8,8 +8,6 @@
 
 #include <configs/rk3568_common.h>
 
-#define CONFIG_SUPPORT_EMMC_RPMB
-
 #define ROCKCHIP_DEVICE_SETTINGS \
 			"stdout=serial,vidconsole\0" \
 			"stderr=serial,vidconsole\0"

include/configs/firefly_rk3308.h

@@ -8,8 +8,6 @@
 
 #include <configs/rk3308_common.h>
 
-#define CONFIG_SUPPORT_EMMC_RPMB
-
 #define ROCKCHIP_DEVICE_SETTINGS \
 			"stdout=serial,vidconsole\0" \
 			"stderr=serial,vidconsole\0"

include/configs/octeontx2_common.h

@@ -41,7 +41,6 @@
 #if defined(CONFIG_MMC_OCTEONTX)
 #define MMC_SUPPORTS_TUNING
 /** EMMC specific defines */
-#define CONFIG_SUPPORT_EMMC_RPMB
 #endif
 
 #endif /* __OCTEONTX2_COMMON_H__ */

include/configs/octeontx_common.h

@@ -70,9 +70,6 @@
 #define CONFIG_SYS_MMC_MAX_BLK_COUNT	8192
 
 /** EMMC specific defines */
-#if defined(CONFIG_MMC_OCTEONTX)
-#define CONFIG_SUPPORT_EMMC_RPMB
-#endif
 
 #if defined(CONFIG_NAND_OCTEONTX)
 /*#define CONFIG_MTD_CONCAT */