-
Fabio Estevam authored
Add a README file to explain how to build and flash the SD card for Udoo boards. Signed-off-by:Fabio Estevam <fabio.estevam@nxp.com>
Fabio Estevam authoredAdd a README file to explain how to build and flash the SD card for Udoo boards. Signed-off-by:
To learn more about this project, read the wiki.
README 517 B
How to use U-Boot on MX6Q/DL Udoo boards ---------------------------------------- - Build U-Boot for MX6Q/DL Udoo boards: $ make mrproper $ make udoo_defconfig $ make This will generate the SPL image called SPL and the u-boot.img. - Flash the SPL image into the SD card: sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync - Flash the u-boot.img image into the SD card: sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync - Insert the SD card in the board, power it up and U-Boot messages should come up.