home.md

@@ -3,12 +3,11 @@
 ## Ready to flash Bootloaders:
 
 If you don't want to build anything and you are just after some binaries you can flash, you can use:
-* S905D2 - U200 :
+* S905D2 - U200 : [u200-emmc-uboot.bin](uploads/b55c58d0ed78f4206e6b1acb8667d30e/u200-emmc-uboot.bin)
 * S905X2 - SEI510 (Franklin) :
 * S905D2 - X96 :
 
-To make the initial flash, you may side load the bootloader using amlogic `update` tool:
-<insert_url_here_to-flash_update>
+To make the initial flash, you may side load the bootloader using amlogic `update` tool: https://drive.google.com/open?id=1ML3Np6Qvxx-x6hap4PEHJUt6OYNwKnKi
 
 Then put the board in USB boot mode:
 * Plug the USB cable in the appropriate port and in your computer
@@ -50,7 +49,7 @@ make
 ### The easy way - pre-packaged binaries:
 
 The easiest way is to use the binaries we already packaged:
-* S905D2 - U200 :
+* S905D2 - U200 : [fip-collect-g12a-g12a_u200_v1-20190110-184413.tar.xz](uploads/aaa5fa102c30bb3b0ec2d3dd1a563eca/fip-collect-g12a-g12a_u200_v1-20190110-184413.tar.xz)
 * S905X2 - SEI510 (Franklin) :
 * S905D2 - X96 :
 
@@ -73,18 +72,19 @@ make
 * Finally, collect the binaries:
 ```
 mkdir collect-dir
-cp ${BRDIR}/bootloader/uboot-repo/build/scp_task/bl301.bin $TMP/
-cp ${BRDIR}/bootloader/uboot-repo/build/board/amlogic/${BOARDCFG}/firmware/bl21.bin $TMP/
-cp ${BRDIR}/bootloader/uboot-repo/build/board/amlogic/${BOARDCFG}/firmware/acs.bin $TMP/
-cp ${BRDIR}/bootloader/uboot-repo/fip/${SOCFAMILY}/aml_encrypt_${SOCFAMILY} $TMP/aml_encrypt
-cp ${BRDIR}/bootloader/uboot-repo/fip/acs_tool.pyc $TMP
-cp ${BRDIR}/bootloader/uboot-repo/bl2/bin/${SOCFAMILY}/bl2.bin $TMP/
-cp ${BRDIR}/bootloader/uboot-repo/bl30/bin/${SOCFAMILY}/bl30.bin $TMP/
-
+for bin in "bl2.bin acs.bin bl30.bin bl301.bin bl31.img"
+do
+    cp ${BRDIR}/bootloader/uboot-repo/fip/build/${bin} collect-dir
+done
+
+for bin in "ddr4_1d.fw ddr4_2d.fw ddr3_1d.fw piei.fw lpddr4_1d.fw lpddr4_2d.fw diag_lpddr4.fw"
+do
+    cp ${BRDIR}/bootloader/uboot-repo/fip/g12a/${bin} collect-dir
+done
 ```
 OR you can use this script [collect-aml-binaries-new.sh](uploads/afa7f471af14fad11783bf77f2c3a968/collect-aml-binaries-new.sh) which will do it for you
 ```
-./collect-aml-binaries.sh <buildroot dir> <vendor-u-boot-path> gxl libretech-cc
+./collect-aml-binaries-new.sh <buildroot dir> g12a g12a_u200_v1
 ```
 
 ## Package the Binaries