Changes

Page history
Update U Boot for Yukawa authored by Maxime Jourdan's avatar Maxime Jourdan
Show whitespace changes
Inline Side-by-side
U-Boot-for-Yukawa.md
View page @ c3ae18f1
...@@ -44,6 +44,8 @@ fastboot erase bootenv ...@@ -44,6 +44,8 @@ fastboot erase bootenv
Flashing U-Boot for Yukawa (SEI510) Flashing U-Boot for Yukawa (SEI510)
==================================== ====================================
For most of the following manipulations, you will need a USB A male<->male cable to connect the board to your PC. Make sure to plug in the USB 2.0 (black) port of the SEI510.
* With a SEI510 flashed with Amlogic U-Boot only (original board state) => [From a SEI510 flashed with Amlogic U-Boot](#from-a-sei510-flashed-with-amlogic-u-boot) * With a SEI510 flashed with Amlogic U-Boot only (original board state) => [From a SEI510 flashed with Amlogic U-Boot](#from-a-sei510-flashed-with-amlogic-u-boot)
* With a SEI510 flashed with an earlier version of Mainline U-Boot (No support for `fastboot flash bootloader`) => [From a SEI510 flashed with an earlier version of Mainline U-Boot](#from-a-sei510-flashed-with-an-earlier-version-of-mainline-u-boot) * With a SEI510 flashed with an earlier version of Mainline U-Boot (No support for `fastboot flash bootloader`) => [From a SEI510 flashed with an earlier version of Mainline U-Boot](#from-a-sei510-flashed-with-an-earlier-version-of-mainline-u-boot)
* With a SEI510 flashed with Mainline U-Boot (supporting `fastboot flash bootloader`) => [From a SEI510 flashed with Mainline U-Boot](#from-a-sei510-flashed-with-mainline-u-boot) * With a SEI510 flashed with Mainline U-Boot (supporting `fastboot flash bootloader`) => [From a SEI510 flashed with Mainline U-Boot](#from-a-sei510-flashed-with-mainline-u-boot)
... ...
......